When selecting your batter, you should pay attention to the accessories of your vehicle.
- Sizes (L0,L1,...., C)
- Cold Cranking Current (.....A - EN)
- Capacity (.....Ah)
Before connecting the battery to the vehicle, check whether the voltage and density values are as follows.
- Voltage value should be above 12,60V
- Density value should be above 1,270 gr/cm3 at 27 °C'de 1,270 gr/cm3.
Check the battery voltage value and direction and make sure it is correct. In case the terminals are connected reverse, it will give serious damage to the electric system of the vehicle!
Be careful that the stand on which you place your battery should be flat and clean.
When connecting, first connect the positive (+) cable and then the negative cable (-). Tighten the connections firmly. Overtightening may cause break of the terminals, and undertightening may cause arc formation.
When you operate the vehicle by using booster cable, firstly the booster cable firstly from the positive (+) terminal of both batteries and then from the negative (-) terminal of the feeding vehicle should be connected to the chassis of the vehicle as far from the battery of the vehicle to be fed as possible.